Singer 14U354B Manuel d'utilisateur télécharger pdf (Page 33)

• HOVC то SEW AN OVERLOOK BLIND HEM

The excess fabric is trimmed and the hem is sewn

and the raw edges are overlocked in one operation.

The overlock blind hem is best suited for sewing knit

wear. It provides a durable finish that is almost

invisible.

* Remove the left needle and adjust machine for a

narrow three-thread overlock stitch.

Note: The three-thread flatlock stitch can also be

used.

* Set the stitch length dial at 4 ^ 5.

* Fold the hem to the wrong side of the fabric, then

back to the right side with 6mm (1/4") beyond

the fold.

* Stitch on the extended hem edge, allowing the

machine needle to barely catch the edge of the

fold.

Note: An optional blind hem foot (ULTRA HEM

FOOT) is available, (page 45)

* HOW TO SEW PIN TUCKS

Sew decorative pin tucks on the fabric before cutting

out the garment.

* Remove the left needle and adjust machine for a

narrow three-thread overlock stitch.

Note: The rolled hem stitch can also be used for this

technique.

* Place the movable upper knife in the non-operat

ing position (page 23).

* Mark the fabric with the desired number of pin

tucks using a water soluble fabric marker.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Pas de commentaire

Singer 14U354B Manuel d'utilisateur Page 33