Singer 4022 Manuel d'utilisateur télécharger pdf (Page 46)

Four-Step Buttonholing

® Pattern Selector: As illustrated

® Stitch Width; 3»5 to suit fabric

® Stitch Length: F to 3

® General Purpose Needle Plate

® Buttonhole Foot

Preparation

® Attach buttonhole foot to the

machine. Refer to page 5 for addi

tional information on changing

presser feet.

1. Raise presser foot lifter. Hold

upper thread lightly with left hand

and turn hand wheel slowly

toward you until needle enters the

plate.

BE CAREFUL THAT YOU DO

NOT RUN THE MACHINE DUR

ING THIS PROCEDURE.

Continue turning hand wheel and

holding upper thread until needle

rises. Tighten your hold on upper

thread and bring up lower thread

in a loop. Release upper thread.

Slide scissors between foot A and

plate B and draw both upper and

lower threads diagonally toward

the back of the foot, leaving

approximately 10 cm (4 inches) of

thread.

® Set machine according to above

code.

2. Place fabric with buttonhole

marking lines under foot. Align

bar tack marking line C with

notches on the solid white section

of foot D.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 55 56

Pas de commentaire

Singer 4022 Manuel d'utilisateur Page 46