Singer 2001 TouchTronic Manuel d'utilisateur télécharger pdf (Page 81)

Ladder Seam

The blindstitch ladder seam is particularly ap

propriate for knit and stretch fabrics. It is ideal

for stretchable construction seams, and edge

finishes for necklines, pockets and collars in

sportswear and swimsuits.

• Stitch: blindstitch i

• Stitch width: programmed or to suit application

or fabric

• Stitch length: programmed or to suit application

or fabric

• General purpose needle plate

• General purpose foot or special purpose foot

* •

• Make a test sample to adjust stitch width

and length and needle thread tension to suit

the fabric. Needle thread tension should be

lighter than normal.

• Cut and fit garment, allowing for 5/8-inch

(1.5cm) seam allowance. Baste seam line.

• Place fabric under presser foot so that the

straight stitches fall on the seam line bast

ing and the points toward the center of the

garment.

• After stitching, open seam by pulling fabric

back on opposite sides of the seam to pro

duce ladder effect. Press seam allowance

after opening.

Blindstitching a Ladder Seam

Ladder Effect on Finished Garment

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 125 126

Pas de commentaire

Singer 2001 TouchTronic Manuel d'utilisateur Page 81