Singer 2001 TouchTronic Manuel d'utilisateur télécharger pdf (Page 119)

Bobbin displaced during winding.

Make sure . . .

• Bobbin is being wound at a moderate speed.

• Bobbin is properly seated and secured by

the latch in the bobbin case.

Thread breaks when sewing starts after

winding bobbin.

Make sure . . .

• Bobbin has not been wound beyond the

FULL ring. Turn hand wheel away from

operator to free over wound bobbin.

• Bobbin case area is free of lint and loose

threads. (See page 102)

(Turn to page 23 for bobbin information.)

LOW BOBBIN INDICATOR

Does not light up when there is little or no

thread in bobbin.

Make sure . . .

• Bobbin case area is free of lint and loose

threads. (See page 102)

• Needle is straight and sharp.

(Turn to page 11 for additional information.)

• Needle thread tension is not too tight. (See

page 37)

• Bobbin is correctly inserted in machine.

(See page 25)

• Bobbin rim is free of nicks.

• Needle plate hole and presser foot are un

damaged.

• Threads are correctly placed under presser

foot when starting to sew. (See page 24)

• Presser foot is securely fastened to presser

bar. (See page 7)

(Turn to page 18 for additional information.)

Bobbin thread breaks.

Make sure . . .

• Bobbin has been correctly wound.

• Bobbin case area is free of lint and loose

threads. (See page 102)

• Bobbin has been correctly inserted into

bobbin case.

• Bobbin has not been wound too full.

(Turn to page 24 for additional information.)

THREAD BREAKS WHILE SEWING

Needle thread breaks.

Make sure . . .

• Machine is properly threaded.

• Thread spool is inserted correctly on spool

holder.

• Thread is unwinding freely from spool.

• Thread spool is secured by correct holder.

• Thread is even and free from knots.

(Turn to page 18 for additional information.)

• Needle is correct size for thread.

STITCHING DIFFICULTIES

Skipped stitches.

Make sure . . .

• Needle is straight and sharp.

• Needle is correct style for machine and size

of thread. (See page 14)

• Machine is properly threaded. (See page 18

for instructions)

• Fabric is held down firmly (particularly when

doing free-motion darning and embroidery).

• Correct presser foot and needle plate are

being used.

105

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 125 126

Commentaires sur ces manuels

Pas de commentaire